Filter
Top Products
DL Explorer Chapter 4
DL-V3 User Manual Rev 3 57
4.1.2 Exiting DL Explorer
To exit DL Explorer, click the button in the upper right-hand corner of the main window or press
<Alt> + <F4> on your keyboard.
4.2 Receiver Operations
DL Explorer can communicate with the DL-V3 to establish data collection groups.
The DL-V3 can collect several types of data. A group is a profile that tells the receiver what type of
data to collect, at what rate the data should be collected and where the data should be stored (for
example, to the CF card). Use the POWERUP group for automatic data collection on start-up.
4.2.1 Receiver Groups
To start logging data, you must create a group profile and transfer it to the DL-V3. When configuring
your group profile, you can define the group settings to determine the type of information the DL-V3
collects. These group profiles consist of the log type, the data destination, the trigger, period and a
description for each log within the group.
To edit a group, click on the Edit DL Groups... button: .
The DL Groups dialog appears. An example is shown in Figure 19, DL Groups Dialog on Page 57.
Figure 19: DL Groups Dialog
The DL Groups panel, to the left of the dialog, displays the names of the current groups including