Filter
Top Products
4 - 4
4. OPERATION AND DISPLAY
4.1.3 If test operation
POINT
Test operation can be performed using the MR Configurator (servo
configuration software).
(1) When test operation is being performed
Test operation being performed is indicated as follows.
@.
T
@.
Denotes test operation indication.
Indicates the current status. Refer to the following table for below.
Slot number
C
Slot number. Test operation being performed is indicated as follows.
Indication Current Status
@T C@. Servo off status
@T d@. Servo on status
(2) When alarm occurs during test operation
Any alarm that occurred during test operation is indicated as follows.
@.
A
@.
Alarm display
Slot number
6.
Slot number. The decimal point is lit during test operation.
1