Filter
Top Products
4 - 61
4. OPERATION
(4) Outline of absolute position detection data communication
For normal operation, as shown below, the encoder consists of a detector designed to detect a position
within one revolution and a cumulative revolution counter designed to detect the number of revolutions.
The absolute position detection system always detects the absolute position of the machine and keeps it
battery-backed, independently of whether the general-purpose programmable controller power is on or off.
Therefore, once the home position is defined at the time of machine installation, home position return is not
needed when power is switched on thereafter.
If a power failure or a fault occurs, restoration is easy.
MR-J3BAT
LSO
1XO
I/O circuit
Position data, speed data
(current position read)
Home position return
data
EEP-ROM memory
Backup at
power off
LS
Speed detection
1X
Detection of position
within one revolution
Within one-revolution counter
High-speed serial
communication
Speed control
Position control
1 pulse/rev. Cumulative revolution counter
Point table No. selection,
etc.
Servo amplifier
Servo motor
Current position