Filter
Top Products
6 - 17
6. MR Configurator
(10) Pulse move distance unit selection (k)
Select with the option buttons whether the moving distance set is in the command input pulse unit or in the
encoder pulse unit.
(11) Servo motor software forced stop (1))
Click the "Software forced stop" button to stop the servo motor rotation immediately. When the "Software
forced stop" button is enabled, the "Forward" and "Reverse" buttons cannot be used. Click the "Software
forced stop" button again to make the "Forward" and "Reverse" buttons enabled.
(12) Positioning operation window closing ( m) )
Click the "Close" button to cancel the positioning operation mode and close the window.
(13) Switching to usual operation mode
To switch from the test operation mode to the usual operation mode, turn OFF the power of the servo
amplifier.