Filter
Top Products
5 - 59
5. OPERATION
(a) For MR-J3-350T or less
MR-J3-200T4 or less
POINT
For the servo amplifier with a battery holder on the bottom, it is not possible to
wire for the earth with the battery installed. Insert the battery after executing
the earth wiring of the servo amplifier.
Insert connector into CN4.
(b) For MR-J3-500T or more
MR-J3-350T4 or more
Insert connector into CN4.
(c) Parameter setting
Set parameter No.PA03 (Absolute position detection system) as indicated below to make the absolute
position detection system valid.
Parameter No.PA03
Selection of absolute position detection system
0: Incremental system
1: Absolute position detection s
y
stem
1