Filter
Top Products
7 - 19
7. MR Configurator
7.7.4 Output signal (DO) forced output
POINT
When an alarm occurs, the DO forced output is automatically canceled.
Each servo amplifier output signal is forcibly switched on/off independently of the output condition of the output
signal.
Click "Test" on the menu bar and click "Forced output" on the menu.
Clicking displays the confirmation window for switching to the test operation mode.
Click the "OK" button to display the setting screen of the DO forced output.
During the servo on, the confirmation window indicating that the next operation is in the stop status is
displayed.
After confirming that the operation is in the stop status, click the "OK" button to display the setting screen for
the DO forced output.
When the above choices are made, the following window appears.
a)
c)
b)