Filter
Top Products
14 - 67
14. OPTIONS AND AUXILIARY EQUIPMENT
(3) CC-Link twisted cable
POINT
For the cables other than the one indicated here, refer to the open field
network CC-Link catalog (L(NA)74108143).
The specifications of the twisted cable usable in CC-Link and the recommended cable are indicated below.
If the cable used is other than the recommended cable indicated in the following table, we cannot guarantee
the performance of CC-Link. For inquiries on CC-Link compatible cables, contact the nearest Mitsubishi
Electric System Service.
Item Specifications
Model FANC-110SBH
Manufacturer Kuramo Electric
Application For fixed parts
Size 20AWG 3
Insulator material Polyethylene foam
Insulator color Blue, white, and yellow
Sheath material Oil resistant vinyl
Sheath color Brown
Operating temperature range (Note) 0 to 75 (32 to 167 )
Tensile strength 49N
Minimum bend radius 35mm
Outline dimension Approx. 7.6mm
Approximate mass 70kg/km
Conductor resistance (20 ) 34.5 /km or lower
Characteristic impedance 110 15
UL AWM Style 2464
CAN/CSA-C22.2
Applicable specification
No.210.2-M90(cUL)
Sheath
Braided screen
Tape
Insulator
Conductor
Inclusion
Ground wire
Fig. 14.1 Structure
Note. An upper limit of the operating temperature range shows a heat-resistant temperature of the cable material.
In high-temperature environment, the transmittable distance may be reduced.