Chapter 1—Introduction 63230-300-212
Topics Not Covered in This Bulletin April 2001
© 2001 Schneider Electric All Rights Reserved
4
Some of the circuit monitor’s many features include:
• True rms metering to the 255th harmonic
• Accepts standard CT and PT inputs
• 600 volt direct connection on metering inputs
• Certified ANSI C12.20 revenue accuracy and IEC 687.2 class revenue
accuracy
• High accuracy—0.04% current and voltage
• Min/max readings of metered data
• Power quality readings—THD, K-factor, crest factor
• Real-time harmonic magnitudes and angles to the 63rd harmonic
• Current and voltage sag/swell detection and recording
• Downloadable firmware
• Easy setup through the optional remote display (password protected)
where you can view metered values
• Setpoint-controlled alarm and relay functions
• Onboard alarm and data logging
• Wide operating temperature range –25° to 70°C
• Modular, field-installable digital and analog I/O modules
• Flexible communications—RS-485 and RS-232 communications are
standard, optional Ethernet communications card available with fiber optic
connection
• Two option card slots for field-installable I/O and Ethernet capabilities
• Standard 8MB onboard logging memory (field upgradable to 16 MB, 32
MB, and higher
• CT and PT wiring diagnostics
• Revenue security with utility sealing capability
Some of the circuit monitor’s advanced features, such as onboard data logs
and alarm log files, can only be set up over the communications link using
SMS. SMS versions 3.12 and higher support the CM4000 device type.This
circuit monitor instruction bulletin describes these advanced features, but
does not tell how to set them up. For instructions on using
SMS,refertothe
SMS online help and the
SMS-3000 Setup Guide,
which is available in
English (63220-060-200), French (63220-060-201), and Spanish (63220-
060-202). For information about related instruction bulletins, see Table 1–2
on page 3.
CM4 Mounting Adapters CM4MA
63230-204-316
63230-300-206
63230-305-201
4-ft display cable (1.2 m) CAB-4
N/A
12-ft display cable (3.6 m) CAB-12
30-ft display cable (9.1 m) CAB-30
10-ftRS-232cable(3m) CAB-106
Table 1–2: Circuit Monitor Parts, Accessories, and Custom Cables
For parts list of individual inputs and outputs, see Table 5–1onpage70.
Features
TOPICS NOT COVERED IN
THIS BULLETIN