Filter
Top Products
63230-300-212 Appendix A—Abbreviated Register Listing
April 2001 Register Listing
151
© 2001 Schneider Electric All Rights Reserved
2086 Present Demand Voltage B-N D Volts/Scale 0 to 32,767
2087 Running Average Demand Voltage B-N D Volts/Scale 0 to 32,767
2088 Maximum Demand Voltage B-N D Volts/Scale 0 to 32,767
2089 to 2092 Maximum Demand Date/Time Voltage B-N — See Template See Template
2093 Minimum Demand Voltage B-N D Volts/Scale 0 to 32,767
2094 to 2097 Minimum Demand Date/Time Voltage B-N — See Template See Template
2100 Last Demand Voltage C-N D Volts/Scale 0 to 32,767
2101 Present Demand Voltage C-N D Volts/Scale 0 to 32,767
2102 Running Average Demand Voltage C-N D Volts/Scale 0 to 32,767
2103 Maximum Demand Voltage C-N D Volts/Scale 0 to 32,767
2104 to 2107 Maximum Demand Date/Time Voltage C-N — See Template See Template
2108 Minimum Demand Voltage C-N D Volts/Scale 0 to 32,767
2109 to 2112 Minimum Demand Date/Time Voltage C-N — See Template See Template
2115 Last Demand Voltage N-G E Volts/Scale 0 to 32,767
2116 Present Demand Voltage N-G E Volts/Scale 0 to 32,767
2117 Running Average Demand Voltage N-G E Volts/Scale 0 to 32,767
2118 Maximum Demand Voltage N-G E Volts/Scale 0 to 32,767
2119 to 2122 Maximum Demand Date/Time Voltage N-G — See Template See Template
2123 Minimum Demand Voltage N-G E Volts/Scale 0 to 32,767
2124 Minimum Demand Date/Time Voltage N-G — See Template See Template
2130 Last Demand Voltage L-N Average D Volts/Scale 0 to 32,767
2131 Present Demand Voltage L-N Average D Volts/Scale 0 to 32,767
2132 Running Average Demand Voltage L-N Average D Volts/Scale 0 to 32,767
2133 Maximum Demand Voltage L-N Average D Volts/Scale 0 to 32,767
2134 Maximum Demand Date/Time Voltage L-N Average — See Template See Template
2138 Minimum Demand Voltage L-N Average D Volts/Scale 0 to 32,767
2139 to 2142 Minimum Demand Date/Time Voltage L-N Average — See Template See Template
2150
Last Demand Real Power, 3-Phase Total
3-Phase total present real power demand for last completed
demand interval, updated every sub-interval
F kW/Scale -32,767 to 32,767
2151 Present Demand Real Power, 3-Phase Total F kW/Scale -32,767 to 32,767
2152 Running Average Demand Real Power, 3-Phase Total F kW/Scale -32,767 to 32,767
Table A–3:Abbreviated Register List
Register
Number
Description
Scale
Factor
Units Register Range
See “How Power Factor is Stored in the Register” on page 128.
The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value
between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to 0; -0.999 maps to 0.999;0.999 leading maps to 1.001; and 0 leading
maps to 2. The alternate PF is also stored with a scale factor 0.001.
These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup
mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on
how to use the setup-mode commands.
Quantity available for 4-wire system only. Value set to -32,768 if not available.