Filter
Top Products
63230-300-212 Chapter 3—Operation
April 2001 Operating the Display
11
© 2001 Schneider Electric All Rights Reserved
This section explains a few conventions that were developed to streamline
instructions in this chapter. Figure 3–3 shows the parts of a menu.
Figure 3–3: Parts of a menu
Each time you read “select” in this manual, choose the option from the menu
by doing this:
1. Press the arrows to highlight the menu option.
2. Press the enter button to select that option.
To change a value, the procedure is the same on every menu:
1. Use the arrow buttons to scroll to the menu option you want to
change.
2. Press the enter button to select the value. The value begins to blink.
3. Press the arrow buttons to scroll through the possible values. To select
the new value, press the enter button.
4. Press the arrow buttons to move up and down the menu options. You can
change one value or all of the values on a menu. To save the changes,
press the menu button until the circuit monitor displays:
“Save changes? No”
NOTE: Pressing the menu button while a value is blinking will return that
value to its most current setting.
5. Press the arrow to change to “Yes ,” then press the enter button to save
the changes.
Display Menu Conventions
Menu
Menu Option
Value
DISPLAY
Language English
Date MM/DD/YYYY
Time Format 2400hr
VFD Sensitivity 3
Display Timer 1 Min
Custom Quantity
Custom Screen
Selecting a Menu Option
Changing a Value