Filter
Top Products
Appendix A—Abbreviated Register Listing 63230-300-212
Register Listing April 2001
© 2001 Schneider Electric All Rights Reserved
162
3314
Average/Min/Max Log Channel #14 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
1171 Displacement Power
Factor, Total
3315
Average/Min/Max Log Channel #15 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
1207 THD/thd Voltage Phase
A-N
3316
Average/Min/Max Log Channel #16 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
1208 THD/thd Voltage Phase
B-N
3317
Average/Min/Max Log Channel #17 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
1209 THD/thd Voltage Phase
C-N
3318
Average/Min/Max Log Channel #18 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
1211 THD/thd Voltage Phase
A-B
3319
Average/Min/Max Log Channel #19 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
1212 THD/thd Voltage Phase
B-C)
3320
Average/Min/Max Log Channel #20 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
1213 THD/thd Voltage Phase
C-A
3321
Average/Min/Max Log Channel #21 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
2150 Last Demand, Real
Power, 3-Phase Total
3322
Average/Min/Max Log Channel #22Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
2165 Last Demand, Reactive
Power, 3-Phase Total
3323
Average/Min/Max Log Channel #23 Meter Register
0 = No calculation for this channel
——
0, 1100 to 2999; Default =
2180 Last Demand, Apparent
Power, 3-Phase Total
3324
Average/Min/Max Log Channel #24 Meter Register
0 = No calculation for this channel
——0, 1100 to 2999; Default = 0
3325
Average/Min/Max Log Channel #25 Meter Register
0 = No calculation for this channel
——0, 1100 to 2999; Default = 0
3350
Discrete Input Point Assignment to Discrete Input Status
Bitmap Bit 00
IO Point Number for Discrete Input to include in Discrete Input
Status Bitmap: Bit 00.
0 = none, default = 3 (Dig In A-S1)
——0to66
3351
Discrete Input Point Assignment to Discrete Input Status
Bitmap Bit 01
IO Point Number for Discrete Input to include in Discrete Input
Status Bitmap: Bit 01.
0 = none, default = 4 (Dig In A-S2)
——0to66
Table A–3:Abbreviated Register List
Register
Number
Description
Scale
Factor
Units Register Range
See “How Power Factor is Stored in the Register” on page 128.
The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value
between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to0; -0.999 maps to 0.999;0.999 leadingmaps to 1.001; and 0 leading
maps to 2. The alternate PF is also stored with a scale factor 0.001.
These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup
mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on
howtousethesetup-modecommands.
Quantity available for 4-wire system only. Value set to -32,768 if not available.