63230-300-212 Appendix A—Abbreviated Register Listing
April 2001 Register Listing
177
© 2001 Schneider Electric All Rights Reserved
10285 Alarm Type #171 Counter — 1.0 0 to 32,767
10286 Alarm Type #172 Counter — 1.0 0 to 32,767
10287 Alarm Type #173 Counter — 1.0 0 to 32,767
10288 Alarm Type #174 Counter — 1.0 0 to 32,767
10289 Alarm Type #175 Counter — 1.0 0 to 32,767
Table A–5:Registers for Alarm Position Counters
Register
Number
Description
Scale
Factor
Units Register Range
These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup
mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on
how to use the setup to mode commands.