63230-300-212 Chapter 3—Operation
April 2001 Configuring the Circuit Monitor Using the Setup Menu
13
© 2001 Schneider Electric All Rights Reserved
Before you can access the Setup menu from the Main Menu, you must enter
the Setup password. The default password is 0. To change the password, see
“Setting Up Passwords” on page 27. The Setup menu has the following
options:
• Date & Time
• Display
• Communications
• Meter
• Alarm
• I/O
• Passwords
Each of these options is described in the sections that follow.
Setting up the display involves, for example, choosing a date and time format
that you want to be displayed. To set up the display, follow these steps:
1. From the Main Menu, select Setup > Display.
The Display Setup menu displays. Table 3–1 describes the options on this
menu.
2. Use the arrow buttons to scroll to the menu option you want to change.
3. Press the enter button to select the value.The value begins to blink. Use
the arrow buttons to scroll through the available values. Then, press the
enter button to select the new value.
4. Use the arrow buttons to scroll through the other options on the menu, or
if you are finished, press the menu button to save.
CONFIGURING THE CIRCUIT
MONITOR USING THE
SETUP MENU
Setting Up the Display
DISPLAY
Language English
Date MM/DD/YYYY
Time Format AM/PM
VFD Sensitivity 2
Display Timer 5
Custom Quantity
Custom Screen