Texas Instruments TMS320C67X/C67X+ DSP Car Speaker User Manual


 
Branch Using NMI Return Pointer B NRP
3-75 Instruction SetSPRU733
Branch Using NMI Return Pointer
B NRP
Syntax B (.unit) NRP
.unit = .S2
Compatibility C62x, C64x, C67x, and C67x+ CPU
Opcode
31 29 28 27 23 22 18 17 13 12 11 6 5 4 3 2 1 0
creg z dst 0 0 1 1 1 0 0 0 0 0 x 0 0 0 0 1 1 1 0 0 0 s p
3 1 5 1 1 1
Opcode map field used... For operand type... Unit
src2 xsint .S2
Description NRP is placed in the program fetch counter (PFC). This instruction also sets
the NMIE bit. The PGIE bit is unchanged.
If two branches are in the same execute packet and are both taken, behavior
is undefined.
Two conditional branches can be in the same execute packet if one branch
uses a displacement and the other uses a register, IRP, or NRP. As long as only
one branch has a true condition, the code executes in a well-defined way.
Execution if (cond) NRP
PFC
else nop
Notes:
1) This instruction executes on .S2 only. PFC is program fetch counter.
2) Refer to the chapter on interrupts for more information on NRP and
NMIE.
3) The execute packets in the delay slots of a branch cannot be interrupted.
This is true regardless of whether the branch is taken.
4) See section 3.5.2 on page 3-18 for information on branching into the
middle of an execute packet.