Filter
Top Products
CLR Clear a Bit Field
3-78 Instruction Set SPRU733
Description The field in src2, specified by csta and cstb, is cleared to zero. csta and cstb
may be specified as constants or as the ten LSBs of the src1 registers, with
cstb being bits 0−4 and csta bits 5−9. csta signifies the bit location of the LSB
in the field and cstb signifies the bit location of the MSB in the field. In other
words, csta and cstb represent the beginning and ending bits, respectively, of
the field to be cleared. The LSB location of src2 is 0 and the MSB location of
src2 is 31. In the example below, csta is 15 and cstb is 23. Only the ten LSBs
are valid for the register version of the instruction. If any of the 22 MSBs are
non-zero, the result is invalid.
src2
dst
0xxxxxxxx xxxxxxxxxxxxxxx11 111000
0xxxxxxxx xxxxxxxxxxxxxxx00 000000
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
csta
cstb
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Execution If the constant form is used:
if (cond) src2 clear csta, cstb
→ dst
else nop
If the register form is used:
if (cond) src2 clear src1
9..5
, src1
4..0
→ dst
else nop
Pipeline
Stage
E1
Read src1, src2
Written dst
Unit in use
.S
Instruction Type Single-cycle
Delay Slots 0
See Also SET
Pipeline