Filter
Top Products
Control Register File
2-15CPU Data Paths and ControlSPRU733
Table 2−7. Control Status Register (CSR) Field Descriptions (Continued)
Bit DescriptionValueField
7−5 PCC 0−7h Program cache control mode. Writable by the MVC instruction. See the
TMS320C621x/C671x DSP Two-Level Internal Memory Reference Guide
(SPRU609).
0 Direct-mapped cache enabled
1h Reserved
2h Direct-mapped cache enabled
3h−7h Reserved
4−2
DCC 0−7h Data cache control mode. Writable by the MVC instruction. See the
TMS320C621x/C671x DSP Two-Level Internal Memory Reference Guide
(SPRU609).
0 2-way cache enabled
1h Reserved
2h 2-way cache enabled
3h−7h Reserved
1
PGIE Previous GIE (global interrupt enable). Copy of GIE bit at point when
interrupt is taken. Physically the same bit as SGIE bit in the interrupt task
state register (ITSR). Writeable by the MVC instruction.
0 Disables saving GIE bit when an interrupt is taken.
1 Enables saving GIE bit when an interrupt is taken.
0
GIE Global interrupt enable. Physically the same bit as GIE bit in the task state
register (TSR). Writable by the MVC instruction.
0 Disables all interrupts, except the reset interrupt and NMI (nonmaskable
interrupt).
1 Enables all interrupts.