Filter
Top Products
Set a Bit Field SET
3-211 Instruction SetSPRU733
Description The field in src2, specified by csta and cstb, is set to all 1s. The csta and cstb
operands may be specified as constants or in the ten LSBs of the src1 register,
with cstb being bits 0−4 and csta bits 5−9. csta signifies the bit location of the
LSB of the field and cstb signifies the bit location of the MSB of the field. In other
words, csta and cstb represent the beginning and ending bits, respectively, of
the field to be set to all 1s. The LSB location of src2 is 0 and the MSB location
of src2 is 31. In the example below, csta is 15 and cstb is 23. Only the ten LSBs
are valid for the register version of the instruction. If any of the 22 MSBs are
non-zero, the result is invalid.
src2
dst
0xxxxxxxx xxxxxxxxxxxxxxx11 111000
xxxxxxxx xxxxxxxxxxxxxxx1 1111 111 1
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
csta
cstb
Execution If the constant form is used:
if (cond) src2 SET csta, cstb
→ dst
else nop
If the register form is used:
if (cond) src2 SET src1
9..5
, src1
4..0
→ dst
else nop
Pipeline
Stage
E1
Read src1, src2
Written dst
Unit in use
.S
Instruction Type Single-cycle
Delay Slots 0
See Also CLR
Pipeline